Phantom Blade Zero PC guide: shaders, ray tracing, fixes
Phantom Blade Zero PC guide: official requirements, shader compile, ray tracing and DLSS, patch 1.0302256 changes and S-GAME's fixes for stutter and saves.
Checked against 1.0302256 on 11 Nov 2026. We re-test every guide after major updates; if something changed, tell us.
This Phantom Blade Zero PC settings guide covers the official requirements, the first-launch shader compile, ray tracing and DLSS options, and the fixes S-GAME itself recommends for stutter, crashes and corrupted saves. The short version: install on an SSD, let the shaders finish, start from the recommended graphics preset, and only then turn on ray tracing if your GPU has headroom.
Everything below comes from S-GAME's own Steam page, Steam patch notes and official support FAQ. Where the studio gives no number (for example, which areas got faster in patch 1.0302256), we say so instead of guessing.
Official PC requirements
The Steam store page lists two tiers, and both assume Windows 10 or 11 (64-bit), 16 GB of RAM, DirectX 12 and a 145 GB install on an SSD. S-GAME is explicit that an SSD installation is required, not just recommended.
| Tier | CPU | GPU | Target |
|---|---|---|---|
| Minimum | Intel Core i7-8700K / AMD Ryzen 5 3600 | GeForce GTX 1660 6GB / Radeon RX 5500 XT 8GB | 1080p at 30 FPS with upscaling |
| Recommended | Intel Core i5-10600K / AMD Ryzen 5 5600X | GeForce RTX 3060 Ti 8GB / Radeon RX 6700 XT 12GB | 1440p at 60 FPS with upscaling |
Notice that both targets assume upscaling is switched on. If you are near the minimum tier, treat upscaling as part of the baseline rather than an optional extra. Studio support also says to keep at least 160 GB free and, if you can, to avoid installing on the C: drive, which leaves room for shader caches and patches.

First launch: let the shaders compile
On first launch the game compiles shaders. S-GAME's support FAQ says to wait for it to finish before entering the game and warns that sending the game to the background lowers its CPU priority, which can make compilation take longer. In practice that means: start the game, leave the window in front, and do not alt-tab to browse while the progress runs.
- Install on an SSDKeep the 145 GB install off a nearly full drive; the studio suggests at least 160 GB free.
- Update your graphics driverNVIDIA players should use a Game Ready driver (the FAQ names 617.42 as the most ideal version for the game). AMD players should install the latest Adrenalin release.
- Launch and waitLet the first-launch shader compile finish with the game window in the foreground.
- Apply the recommended presetIn Settings, open Graphics and choose "Apply recommended graphics quality level", then confirm.
- Play a section before tweakingJudge frame rate in a real fight, not in a menu, before you change individual options.
What patch 1.0302256 changed for PC
The first big update, version 1.0302256 on Steam, shipped on November 4, 2026. Our patch breakdown covers the full list; this is the PC-specific part according to the official Steam patch notes:
- Faster startup. The shader compilation process was updated to significantly reduce startup times. Ray tracing shaders are no longer compiled by default at startup.
- One-time recompile for some. Players who previously had Ray Tracing disabled need to recompile shaders on their first launch after the patch. It is a one-time process the studio says should take only a short time.
- Ray tracing on demand. If you enable Ray Tracing in settings, the required shaders are compiled separately the next time you restart the game.
- Bluetooth controller stutter. Stuttering that could occur with a controller connected over Bluetooth was reduced.
- NVIDIA Reflex. Reflex now works when set to Auto with V-Sync enabled.
- Remappable Interact / Talk. You can now rebind the interaction key on both keyboard and controller.
- AMD hair fix. Character hair rendering on certain AMD cards with specific driver versions was corrected.
The notes also say performance improved "in certain areas" without naming them, so there are no official frame-rate gains to quote. If you tuned your settings before November 4, it is worth re-testing now.
Ray tracing and DLSS: what to enable
According to the support FAQ, the PC version supports ray tracing for reflections, shadows and caustics, plus DLSS 4.5 with super resolution and multi-frame generation. NVIDIA's recommended setups are listed as follows.
| Goal | GPU | Resolution / target |
|---|---|---|
| Ray tracing | RTX 5060 8GB | 1080p at 60 FPS with super resolution |
| Path tracing | RTX 5080 16GB | 2160p at 60 FPS with super resolution |
If frame rates are still low, S-GAME's advice is blunt: disable ray tracing, or enable DLSS. Beyond that it suggests lowering resolution or the overall quality level, reducing shadow and effects settings, and closing resource-heavy background programs. A sensible order is to drop ray tracing first, then shadows and effects, then resolution scale.
HDR looks washed out? Confirm your monitor supports HDR and that HDR is on in Windows Display settings. On AMD cards the FAQ says to turn off "10-bit Pixel Format" in AMD Software and restart the game.
Fixing stutter, crashes and "device not supported"
The studio gives three concrete fixes, and they work in this order.
- Clear the shader cacheIf you see crashes or stuttering after an update, right-click the game in Steam, choose Manage, then Browse local files, open PBZ\ProjectPBZ\Saved\Cache and delete the files inside. Shaders recompile quickly on the next launch.
- Remove custom launch optionsFor the "This device is not supported" message, delete manually added adapter or graphics parameters such as -graphicsadapter, -ForceDisableSM6 and -gpupreference. Keep any parameters the platform adds itself.
- Remove modsS-GAME warns that some third-party mods are not compatible with the latest update. If problems start after patching, uninstall them, and disable third-party plugins or tools when you chase crashes.
For general low frame rate, the same FAQ says to confirm the SSD install, meet the minimum requirements and use the recommended preset before anything exotic. It is dull advice, but it is the studio's own checklist.
Controller, audio and display options
For PC, S-GAME recommends connecting controllers with a data-capable USB cable. A DualSense over Bluetooth may limit some advanced haptic features. If haptics are missing, keep the controller's audio device enabled in Windows sound settings; to stop sound playing through the controller, set a different default output device rather than disabling it.
In a Steam letter from the creative director, the team describes some of the accessibility work: an audio option to adjust the tone of clashing blades, three button layouts on PS5 with more flexible remapping on PC, and support for 16:9 displays, 16:10 laptops and handhelds, and ultrawide aspect ratios beyond 3:1. Patch 1.0302256 added Hit Sound Intensity and Hit Impact Sound Intensity sliders on top of that, so a fight that feels too loud or too flat is adjustable.
Recovering a corrupted Steam save
Support documents a manual recovery path for Steam saves. Use it only if a save will not load, and back up the folder first.
- Delete the broken fileIn the SaveGames\Steam\(your Steam ID) folder, delete PBZSaveGame.sav.
- Restore a backupCopy a backup from the 1RealTime folder that predates the corruption, rename it to PBZSaveGame.sav, then load it.
- Try the parent folderIf 1RealTime has no suitable backup, the FAQ says to try the backups in the parent folder.
- Prevent a repeatSave at a bell, close the game, and let Steam Cloud finish syncing before you shut the PC down.
A practical starting point by hardware
S-GAME does not publish per-setting values, so the table below translates the official guidance into a testing order rather than inventing numbers.
| Your PC | Start with | If FPS is low |
|---|---|---|
| Around minimum (GTX 1660 / RX 5500 XT) | Recommended preset, upscaling on, ray tracing off | Lower resolution and shadow/effects settings |
| Around recommended (RTX 3060 Ti / RX 6700 XT) | Recommended preset, upscaling on, 1440p | Keep ray tracing off or use DLSS on NVIDIA |
| RTX 5060 class | Ray tracing at 1080p with super resolution | Disable ray tracing or raise upscaling |
| RTX 5080 class | Path tracing at 2160p with super resolution | Step down to ray tracing before cutting resolution |
Once the game runs smoothly, the combat is where the effort pays off. Our opening hours walkthrough explains blue and red flashes and the first bosses, and the launch sales story shows why so many players are hitting the same PC questions. For more of our action coverage, browse the guides hub or the Phantom Blade Zero hub.
FAQ
How big is Phantom Blade Zero on PC?
The Steam page lists 145 GB of storage, on an SSD. Support recommends keeping at least 160 GB free, and the pre-load announcement advised reserving 300 GB of free disk space during the pre-load process.
Why is the first launch slow?
The game compiles shaders on first launch. Patch 1.0302256 reduced startup times and stopped compiling ray tracing shaders by default, but you should still keep the game in the foreground until it finishes.
Does Phantom Blade Zero support DLSS and ray tracing?
Yes. Support lists ray tracing (reflections, shadows, caustics) and DLSS 4.5 with super resolution and multi-frame generation on PC. If performance suffers, S-GAME recommends turning ray tracing off or enabling DLSS.
How do I fix crashes or stutter after an update?
Delete the files inside PBZ\ProjectPBZ\Saved\Cache and relaunch so shaders rebuild, remove incompatible mods, and clear any custom launch parameters if you see a "device not supported" message.
Can I remap the interact key on PC?
Yes. Since patch 1.0302256, Interact / Talk can be remapped on both keyboard and controller.
